Resources-Stuck Hold Decision Tree Poster

Pdf Summary

The document provides a decision tree for removing a stuck climbing hold, starting with the least invasive methods. It guides workers through checking whether the T-nut has popped, then selecting tools and approaches based on the result and whether there is room to cut from the front. Methods include a breaker bar and crowbar, vise grips with a breaker bar, a reciprocating saw, and an angle grinder. Stop once the hold is removed.<br /><br />After removal, inspect the T-nut: its threads may be damaged. Retap the threads, clear debris, check with a magnet, and test using a previously inspected bolt. If no threads remain, the T-nut must be replaced; the position stays out of service until then.<br /><br />To prevent stuck holds, check before routesetting that bolts are the correct standard and length, and that their threads are undamaged. Avoid cross-threading, a common cause of stuck holds.<br /><br />Work behind the wall and T-nut replacement are for trained, authorized workers only. Facility authorization is separate from CWA Professional Routesetting certification. If unsure how to proceed, ask a supervisor. The sheet organizes decisions but does not provide tool-operation training.

Asset Caption

Ever wondered how hard it is to remove a stuck climbing hold?

Use this poster to hang in the hold room.

Keywords

stuck climbing hold

decision tree

T-nut

breaker bar

crowbar

vise grips

reciprocating saw

angle grinder

thread damage

routesetting safety